|
We construct top of the line, all steel, aluminized finish, extremely durable flagpoles. Our parent company is a U.S. Government Defense Contractor. This greatly assisted us in our quest to design and construct a traditional and historically correct flagpole. Our poles are fashioned after the Arlington poles of 1940-1947. Our 22' Homeowners and our 28' Estate Pole are both a full 3" in dia. at the base. They pleasingly taper down at two locations, (three sections) to a full 2" dia. at the top. These are truly some of the best looking poles on the market!
Flag Pole Kits:
These kits are carefully put together by us·the manufacturerno middle menno sales teamno retail mark-upjust us passing the savingsdirectly to you.
These kits are carefully put together by us...the manufacturer...no middle men...no sales team...no retail mark-up...just us passing the savings... directly to you...
Our kit #1 or #2 includes : a Homeowner or Estate flagpole, Pound or concrete in swivel mount, 4" white poly pole topper, Internal halyard , and a 3' X 5' nylon American flag.
Lay Out Pole
Attach Hardware
Bolt To Base
 |
Kit #1 20' Homeowner: $159.00
Kit #2 28' Estate: $179.00
Flag Pole Kits Include:
LetFreedomFly flag poles are manufactured under rigorous quality guidelines. This assures you a flag pole which you can be proud to LetFreedomFly on. Our pole will service you, your property or your estate for years to come. Our poles are all manufactured with an internal halyard system. This internal design allows the rope to stay out of the weather inside the pole but this also greatly improves the visual aspect. To raise and lower the flag the rope is accessed through a hole and retaining slot on the back of the pole.
The 20' Homeowners pole is recommended for smaller lots or property's without any high structures or trees. We consider a 20' pole the absolute minimum height for single story buildings.
The 28' Estate pole is recommended for larger lots or areas containing 2 story or higher structures.
Flag Pole Lights
Our economy light is a durable pre-cast aluminum light which pushes into the ground. The light will accept any 100w floodlight and has a 10' cord. $29.95
Our premium light is fully assembled and wired. It includes a 5' treated 4 X 4 with mounted light box, 10 degree 100w spot light bulb, wired and mounted dusk to dawn sensor, 2' of pvc wire tube and a 10" X 14" clear rain guard. This pole should be mounted in a two foot deep hole 5' in front of your flagpole. $59.95
Our premium kit includes all of the hardware above except the treated 4 X 4 $49.95
Ground Mounts
The swivel ground mount can be pounded in to the ground with a sledge hammer and a block of wood. It is red oxide coated which looks great. If your ground is either too loamy to support a flagpole or too hard or rocky to pound the mount in a hole can be dug and your mount can be concreted in.
Lay Out & Bolt Together
Stand Up
Pound In
 |

A-Fab, Inc.
6008 Lakeview Rd. Larsen, WI. 54947
Bus: 920-836-3074 Fax: 920-836-2325
E-mail: sales@letfreedomfly.com
LetFreedomFly is a registered entity of A-Fab, Inc.
©2008 A-Fab, Inc.
|